|
Product
specifications - least cost routing programmable diallers.
Business multiline chassis units provides at cost effective way of installing Modular Least Cost Routing equipment. Fully Line Powered for reduced cost and ease of installation, the unit can be populated with up to 8 line cards (purchased separately) to a routing specification exactly meeting customers requirements and budgets. Designed for compatibility with today's PBX's, in small businesses through to large
corporate enterprises, our Multi Line Unit is programmable for owner
management, giving the purchaser the flexibility to meet the service and competitiveness that this market sector demands.
The following specifications apply to the budget and
programmable diallers as detailed on our products pages, the programmable
dialler software is Windows compatible only and requires an analogue
modem. A Mac version is not available. The multiline chassis cards
have the same specification as the programmable dialler. The multiline
chassis effectively composes of 8 least cost routing dialers of business
quality in one box. We can also provide ISDN equipment but it is not
detailed within this page.
These
diallers are full function least cost routing devices and this topic is
discussed in some detail in our features pages.
Both diallers are available with BT style connectors for
BT lines.
The programmable dialler is also available with European
connectors
Known as a smart-box or smart box this product helps save
you money on your telephone call costs. These call routers are approved
telecommunications devices with a pan-European approval. You can purchase
them online from us and pay by paypal. The router specifications are
provided below. We also have access to other models of least cost routing
dialers and will increase the range as information becomes available.
|
Budget BT Dialler
|
Programmable
Dialler
|
|
Number of Routes
|
3
|
12+ default
|
|
internal clock with
daylight saving
|
no
|
yes
|
|
timed routing
|
no
|
yes
|
|
time of day phone
home
|
no
|
yes
|
|
peg count / override
phone home
|
yes
|
yes
|
|
program customer std
|
manual
|
automatic
|
|
management format
|
n/a
|
DTMF
|
|
download time to
fill all memory ***
|
n/a
|
7 minutes
|
|
typical download
time
|
n/a
|
50 seconds
|
|
management error
checking
|
n/a
|
checksum on each
message
|
|
exception memory
|
256 digits
|
256 digits
|
|
exception exceptions
|
none
|
N x 32 digit
|
|
route prefix length
|
32 digits
|
32 digits + multiple
delays
|
|
route codes per
route
|
32 digits total, up
to 16 digits per code per route
|
32 digits total, up
to 16 digits per code per route
|
|
multifunction routes
*
|
no
|
yes
|
|
Configurable
dialling delay with dial tone and line reverse detection
|
yes
|
yes
|
|
activation delay
|
none
|
0 to 255 hours
|
|
Auto Routing enable
once customer CLID fulfilled
|
no
|
yes
|
|
phone home intervals
|
1 to 65535 calls
|
1 minute, for up to
15 retries, then 24 hours for another 15 retries
|
|
number translation
|
no
|
yes
|
|
call barring
|
no
|
yes
|
|
pre-dial
|
yes
|
yes
|
|
Downstream phone cut
off during phone home
|
no
|
yes
|
*
Multifunction routes enables each route to perform one of the
following functions;
Time of day / day of week / day of month / date routing
Call bar
Strip dialed number and route (also used to provide memory
capabilities)
Pre dial the dialled number
Post dial the dialled number (standard routing)
The Programmable LCR Router also uses the multifunction routes
for exception and exception exceptions therefore allowing time of
day exceptions etc.
** Route codes per route is the number of (STD) codes possible for
each route, but space must be made for separators, e.g. 32 digits
total provides space for 7 x 4 digit codes plus 3 separators or 1
x 1 digit, 4 x 2 digit, 4 x 3 digit and 2 x 4 digit route codes
inc. separators.
*** These times are worst case in addition to the dialling time.
|
|
QUICK LINKS
