Product Information: Wolsey Lacuna professional satellite meter.

Designed for professional satellite installers with the aim of providing a tool to ensure quick, optimised reception of satellite signals. The meterhas been designed and tested to withstand the vigorous demands of the installation industry. Constructed in a shock absorbent ABS case with an ergonomically angled screen that maximises visibility when the neck strap is worn. The meters are programmable for use worldwide and software upgrades can be obtained from the website, http://www.metersupport.co.uk 
and downloaded to the meter using the data lead provided.

• The meter is operated using a three button control panel and most tasks can be completed with one hand.
• Information is shown on a four line, LCD display with backlight
• The display shows Signal Strength and Picture Quality (BER) simultaneously
• Easy selection and identification of chosen satellites
• Compatible with all transmissions: Ku and C band, DVB and DSS/DBS
• The unit weighs less than 1Kg
• Can be calibrated to suit local BER and Signal Strength conditions
• Rechargeable battery
• Easily changeable F Connector
• LNB power supply with short circuit protection
  

RF Parameters
Input signal frequency 950MHz - 2150MHz
Input signal level -65dBm ~ 25dBm
LNB Service voltage 13v / 18v
LNB 22KHz Switch On / Off at 50% Duty cycle

Sat 2 Meter parameters
Regional settings up to 6 languages (e.g. English, Spanish etc.) or geographical areas (e.g. Europe,America etc.) Maximum data locations 120 per regional setting (i.e. 120 transponders from any satellite combination)
Satellite identification Only chosen satellite is found by unique identification software
Pre-programmed settings as required.
Reception standard DVB or DSS/DBS (selectable)
Modulation standard QPSK
Symbol rate 0 ~ 40Mbit/s
LNB Polarization voltage control 13V / 18V (Short circuit self-protection)
LNB 22KHz Control On / Off (0.6VDC at 50% Duty cycle)

LCD parameters
Screen size 66.5mm x 25mm
No. Characters 64 (4x16)

Power Consumption
Total power consumption 600mAh
Input voltage 12V DC
Available use from full charge 2+ hours continuous
Power adapter parameters
Mains voltage 230V a.c. ± 10%
Mains Frequency 50Hz
Output voltage 12V DC
Output current 400mAh
In-Vehicle charging 12V DC vehicle power adapter
Charge time 10 hours to 90%

Operating conditions
Operating temperature 0°C ~ 80°C
Relative humidity 10% ~ 90%
Atmospheric pressure 86Kpa ~ 106Kpa
Dimensions 212mm x 90mm x 57mm
Weight 580g

Available new by special order or for lease, subject to deposit.

Pricing information, the prices of these meters is not stable at the current time,  at the moment we sell these at 320GBP.

Example of use - the meter can be programmed to distinguish between Astra2D and the other satellites carrying Sky programming - making it an excellent choice for setting up a dish in fringe reception areas where the signals are weaker for BBC and ITV.